DRYWALL PRIMER 4055-6

PLEASE CONTACT STORE FOR SAFETY DATA SHEET OF THE PRODUCT 
    
DESCRIPTION    
A latex primer and sealer with good hiding power and alkali resistance. Its fast dry and speed of application 
permits a two coat paint job the same day.   
      
      
INTENDED USES   
Drywall construction, plaster, masonry as well as many other non-plastic porous surface areas. Suitable for 
large scale project work over drywall, plaster or masonry surfaces.   
      
      
SURFACE PREPARATIONS      
Previously Painted Surfaces : Surface must be clean, dry, sound and free from loose paint etc. Remove grease 
and wax by washing with mineral spirits. Glossy surfaces should be dulled by sanding.   
      
New Wood : Seal knots and problem surfaces with wood and knot sealer before painting. Shellac or Stain 
Blocker recommended. 
   
Drywall : Tape joints must be sanded smooth. Cover nail heads with appropriate filling compound.   
      
Masonry surfaces, Plaster, Cement, Concrete, etc. :All surfaces must be allowed to cure fully before painting. 
Smooth concrete floors must be roughened. Remove all loose chalk etc. from old masonry surfaces before 
painting.   
         
PRODUCT SPECIFICATIONS  
TYPE Polyvinyl acetate - acrylate copolymer 
LUSTRE Flat 
APPLICATION Brush, roll or spray 
SPREADING RATE Up to 10.2 m²/L 
DRY TIME Touch: 30 mins;  Recoatable: 4 - 6 hrs (@25 deg.C & 50% humidity) 
SPECIFIC GRAVITY 1.3 - 1.4  
VISCOSITY 80 - 100 KU 
GLOSS 5 max. (60 degrees head)  
FLEXIBILITY Passes 1/4" Mandrel  
% NON VOLATILE 45 min. by weight 
DRY FILM THICKNESS 1.5 - 2 mils per coat 
VOC 72 g/L 
OTHER DATA If necessary to reduce for spray application, up to 10% water may be used.